CTL 30A RGB RF Remote
Universal DC5/12/24V 30A Red / Green / Blue ( RGB ) LED Compatible Controller with hand held 6keys RF Remote Control. Can control any 12/24V DC RGB color change LED tape light products. Up to fifteen different custom colors can be programmed and saved on the six DIY buttons for direct selection. Specific color selection, custom color programming, or color change with speed control modes and dimming capabilities for accent lighting. for long led light strips.
Control Method
1.Connect the load wire at first, then the power wire; Never connect two wires directly in case of short circuit;
2.According to mode key to choose the different changing mode every time.when the key is pressed the effect is changed, functional changes have been listed as follows.;
3.Press speed key can changed every effect's speed changing progression. "S / B +" add one. When you press the button every time. But "S / B-" will subtract one. Totally 10 progressions to change the speed
4.Standard functional changes have been listed as follows
|
Mode |
|
|
Mode |
|
|
|
1 |
Static red |
Brightness adjustable |
9 |
Seven color jumpy changing |
Speed is adjustable |
|
2 |
Static green |
Brightness adjustable |
10 |
Three color gradual changing |
Speed is adjustable |
|
3 |
Static blue |
Brightness adjustable |
11 |
Seven color jumpy changing |
Speed is adjustable |
|
4 |
Static red and green |
Brightness adjustable |
12 |
RGB quickly chang |
Speed is adjustable |
|
5 |
Static red and blue |
Brightness adjustable |
13 |
Mode 9 and mode 11 |
Speed is adjustable |
|
6 |
Static green and green |
Brightness adjustable |
14 |
RGB gradual changing at the same |
Speed is adjustable |
|
7 |
Static red and green and blue |
Brightness adjustable |
15 |
RGB changing like running water |
Speed is adjustable |
|
8 |
Three color jumpy changing |
Speed is adjustable |
Adopt wireless control method, function of each button as below:
Button "A": is the style / color function key, could choose different color changes
Button "B": each press changing speed + 1
Button "B": each press changing speed-1
Button "D": the output switch.
Note
QUICK and SLOW speed buttons will only work when unit is in one of the color changing (dynamic) modes.
Controller can control a maximum of 20 meters of our Flexible RGB LED Strip. Over 20 meters, the strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
