The Bluetooth LED Music Controller SP107E, according to music performed, allows to control via Bluetooth effects, colors, brightness of your addressable led strips by "LED Chord" app, available for iPhones, iPads and Android devices.

App control:

1. "LED Chord" is available for iOS and Android devises.
2. Requires iOS 10.0 or later. Compatible with iPhone, iPad, and iPod touch.
3. Requires Android 4.4 or later.
4. You can download and install "LED Chord" app from App Store or Google Play. You can also scan the QR Code on the side of the packaging.

Instructions:

                                                                       APP Operations:

                                                                       1. Make sure you have turned on Bluetooth on your phone;

                                                                       2. Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your   controller;

                                                                       3. Select RGB order and IC type;

                                                                       4. Adjust the pixel number;

                                                                       5. Press ENTER;

                                                                       Audio Input:

                                                                       There are two ways to input the audio signal on SP107E: AUX IN and Build-IN microphone;

                                                                       1. AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source (MP3, phone or table) and the speaker (or headset), the controller will automatically switch into AUX input mode.

                                                                      2. MIC: Disconnect the audio cable, the controller will automatically switch into microphone input mode.